 The AlertMaster® AMAX™ Audio Monitor, by Clarity®, is a transmitter that alerts to the sound of a smoke alarm or other audio alerts in the home. |
More info ›› |
|
|
 A photoelectric type detector which is audible-only but can be used with remote strobes. |
More info ›› |
|
|
 The same unit as the Gentex 7100F but with a Silent Call transmitter that will work with any Silent Call receiver. |
More info ›› |
|
|
 All the same features and quality as the other Gentex smoke detector models, except with battery backup. Battery backup operates audible alarm only. |
More info ›› |
|
|
 Has all the same features and quality as the other Gentex smoke detector models, except with battery backup. Battery backup operates audible alarm only. |
More info ›› |
|
|
 The 710CS is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. |
More info ›› |
|
|
 The 710LS is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. |
More info ›› |
|
|
 The 713LS is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. |
More info ›› |
|
|
 The 713 for ceiling or wall mount is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. |
More info ›› |
|
|
 The smoke detector operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. The 7139 series provides the temporal 3 (T3) evacuation tone as a standard feature. |
More info ›› |
|
|
 The 7139 is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. Provides the temporal 3 (T3) evacuation tone as a standard feature. |
More info ›› |
|
|
 A remote signaler (intended for indoor applications only) which connects to Gentex smoke detectors. |
More info ›› |
|
|
 The Kidde Carbon Monoxide Alarm alerts you to increased carbon monoxide (CO) levels in your home. This unit may be used alone or as part of an interconnected alarm system in your home, without requiring any rewiring. |
More info ›› |
|
|
 The Kidde Wireless Smoke Detector is a battery-powered alarm that provides continuous protection even in a power outage with proper battery replacement. It features an 85dB alarm that is loud enough to awaken most adults yet is at a pitch shown to be more effective at waking those with high frequency hearing loss. |
More info ›› |
|
|
 The Lifesaver Carbon Monoxide Detector meets or exceeds the Underwriter Laboratories standards for carbon monoxide detectors. Both the detector and strobe light need to be hard-wired in by a qualified electrician. |
More info ›› |
|
|
 Extra strobe receivers for the Lifesaver Carbon Monoxide Detector. |
More info ›› |
|
|
 This smoke detector system is a wireless, single-function system which detects smoke and then transmits a signal within a 100 foot radius and uses a bed vibrator to warn or wake you up. |
More info ›› |
|
|
 This smoke detector system is a wireless, single-function smoke detector system with alert via strobe light. This system has a range of approximately 100 foot radius. |
More info ›› |
|
|
 This fire alarm transmitter signals a Signature Series Receiver to notify you in the event of a fire or smoke. |
More info ›› |
|
|
|
This fire alarm transmitter with battery signals a Signature Series Receiver to notify you in the event of a fire or smoke. |
More info ›› |
|
|
